Square Hexagon Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed in Fusion360 and printed in 3D Fuel Pro PLA on my MK3S.
- Rating
- 4.906 / 5
- Likes
- 787
- Downloads
- 1,904
- Makes
- 39
- Views
- 10,630
- Reviews
- 32
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution
Designed in Fusion360 and printed in 3D Fuel Pro PLA on my MK3S.
Stuff it will hold include, but not limited to:
Candy
Kosher salt
Hardware
The ashes of a beloved deceased pet
A smaller box
Jewelry
Change
Herbs
The model consists of 6 printed parts, I usually do the base, inner, lid and knob in one color then the trim and shroud in another color.
In addition to the printed parts, you will need:
5x M4x8mm Socket Head Cap Screws to attach the inner to the base and the lid to the knob.
Print instructions
I usually print these in 3D Fuel Pro PLA.
15% infill is fine.
.15mm layer height is a great "Goldilocks" resolution.
No support necessary, although the lid could use a little in the recessed bolt hole.
I design in Imperial (Majestic) Units. If you aren't using the latest PrusaSlicer, you will probably have to adjust scale to 2540% because 25.4mm is equal to 1".