1 / 2
1" Ball clamp for telescope trusses - clearance remix — image 1
1 / 2

1" Ball clamp for telescope trusses - clearance remix

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remix of Sasha's ball clamps to better fit hardware. Clearance holes etc.

Rating
0 / 5
Likes
9
Downloads
46
Makes
1
Views
620
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

See the original for details, but use a 60mm hex-head bolt for the clamps.  A future remix will likely switch the direction of the thru-bolt.

Make sure to print it sturdy.  I used 6 walls and 30 or 50% cubic infill.  (Do note that increasing walls is better for sturdiness than increasing infill, and beyond 50% infill returns are not significant)



Works well enough for a 16 inch reflector, and even PETG-on-metal provided a good enough grip to loosen nyloc bolts for Hexapod collimation.  If this jargon means nothing to you, do one of:

  • read up; this is only mildly complicated, but the info is scattered through old forum posts and word-of-mouth
  • find me on discord
  • find a place where I have put more documentation.
  • re-think making such a complicated telescope.

I'm hosting the files for my 16-incher for anyone to follow in my footsteps, but these are just provided as-is.