Air Assist / Smoke Assist / Air Nozzle for K40 Lasercutter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Air Assist / Smoke Assist / Air Nozzle for K40 Laser.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 106
- Makes
- 0
- Views
- 1,542
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- GNU General Public License v2.0
Air Assist / Smoke Assist / Air Nozzle for K40 Laser. Will fit on a standard 26mm OD laser Head and is held in place by two short M3 Bolts.
The nozzle has an inlet port designed to fit a 6mm OD PVC tube.
To make a smaller opening for the air outlet, superglue a circle of a single line support wall or a thin raft to the bottom and fire the laser through it.
Print instructions
Category: Parts Summary
Air Assist / Smoke Assist / Air Nozzle for K40 Laser. Will fit on a standard 26mm OD laser Head and is held in place by two short M3 Bolts.
The nozzle has an inlet port designed to fit a 6mm OD PVC tube.
To make a smaller opening for the air outlet, superglue a circle of a single line support wall or a thin raft to the bottom and fire the laser through it.