Raspberry PI - SATA SSD Joiner
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.52 – €0.64 net (excluding VAT)
For file: rpissd-joiner_02mm_pla_mini_38m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.58 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 38.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a parametric design of a Raspberry PI + SATA SSD Joiner developed in Freecad, and the source code is here:…
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 75
- Makes
- 0
- Views
- 957
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- GNU General Public License v3.0
This is a parametric design of a Raspberry PI 1 Model B+ SSD Joiner developed in Freecad, and the source code is here:
https://github.com/christiangda/3d-printing-rpi-ssd-joiner
I used this to configure my Octoprint configuration for my Prusa MINI and integrate this into my Ikea PAX
Print instructions
NOTE: Use prusaslicer adaptive layer height, because the M2.5 screw holes needs definition
Print setting:
0.20mm QUALITY
Filament:
Prusament PLA
Printer:
Any 3d Printer, I'm using a Prusa MINI
Support:
None
Infill:
20%