Raspberry PI - SATA SSD Joiner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a parametric design of a Raspberry PI + SATA SSD Joiner developed in Freecad, and the source code is here:…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 956
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v3.0
This is a parametric design of a Raspberry PI 1 Model B+ SSD Joiner developed in Freecad, and the source code is here:
https://github.com/christiangda/3d-printing-rpi-ssd-joiner
I used this to configure my Octoprint configuration for my Prusa MINI and integrate this into my Ikea PAX
Print instructions
NOTE: Use prusaslicer adaptive layer height, because the M2.5 screw holes needs definition
Print setting:
0.20mm QUALITY
Filament:
Prusament PLA
Printer:
Any 3d Printer, I'm using a Prusa MINI
Support:
None
Infill:
20%