Hamax Outback mount protector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple protector/cover that goes over the quick mount that Hamax has developed.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 26
- Makes
- 0
- Views
- 586
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- GNU General Public License v3.0
Description
Simple but effective protector that goes over the quick mount and prevents it from being scratched or damaged when switching wheels.
Background
After only two short tours we already had some damage made to the quick mount by only resting it on the ground when switching wheels and thus this design.
Print settings I used
- Layer height: 0.24
- Material: PLA (I assume TPU is a better fit but I have not try that)
- Infill: 15%
- Supports: None
- Orientation: Printed having the open area downwards
Note: FreeCAD-file comes with a spreadsheet and if you find the model to be to tight then just increase the padding value to a higher value (see picture).
Note: If you do make profit of this model, then please consider donating some to charity of choice.