C69 AR Grip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
An AR style grip modeled after the grip of a C96 (Construktion 96) Mauser by the talented, Laffs Dynamics. This was the gun used to build the DL-44 Blaster prop used by Han Solo in the Star Wars movies so, it is quite suited to use in building a DL-44 replica.
Filament: PLA+ black for the frame. Wood PLA for the side scales. Finish and weather with wood stain.
Orientation: Print as the files appear. Use supports off the build plate only on the frame.
Print Settings:
Extruder: 210C
Bed: 55C
First Layer Print Height: .20mm
Standard Layer Height: .14mm
Wall Thickness: .40
Wall Perimeters: 5 - 6
Infill: 50%
Infill Pattern: Gyroid
Material Flow: 100%
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
2x M5 x 15 Cap Head Screws
2x M5 Nuts
You can find a replica of the DL-44 flash suppressor here.