Magic Eraser Sawzall Attachment

Mr Clean Magic Eraser Holder for Sawzall

I created this model because I needed a way to hold a Mr. Clean Magic Eraser with a Sawzall so I could use it to scrub the siding on my house.  This design modifies an off the shelf tool you can buy at Lowes to adapt to the Magic Eraser.  You will need to buy a few parts to utilize this model.

Parts List

• ¼-20 brass inserts: https://www.amazon.com/dp/B09MTS6ZZQ?psc=1&ref=ppx_yo2ov_dt_b_product_details
   
• Spyder Reciprocating Saw Brush: https://www.lowes.com/pd/Spyder-Reciprocating-Saw-Brush-Attachment/1000060929?cm_mmc=shp-_-c-_-prd-_-tol-_-ggl-_-LIA_TOL_215_Power-Tool-Accessories-_-1000060929-_-local-_-0-_-0&gclid=Cj0KCQjw7PCjBhDwARIsANo7Cgkp6akNXhsoNATrX631KQ9-nuOjjAJ7jXCWE-W85GVs-aIyUfVvNuwaAoXnEALw_wcB&gclsrc=aw.ds
   
• 4x ¼-20 bolts 1.5" in length
   
• 4x ¼ washers

Print Settings

• 6 wall loops
   
• 25% gyroid infill
   
• PETG

Assembly Instructions

1. Print all the parts
    
2. Using a soldering iron or torch press the brass inserts into the largest solid piece with the threads facing away from the indented surface.
    
3. Using a pair of pliers rip out all of the bristles from the Spyder saw brush.
    
4. Place the collar over the Spyder saw brush.
    
5. Bolt it all together with the retaining straps over the top of the Spyder brush.
    
6. Insert magic eraser into the recessed area of the holder attach to your Sawzall and start power scrubbing.

Demo