Voron V0.2 V0.1 Stand with Drawer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Voron V0.2, V0.1 50mm tall stand with a drawer to hold supplies.
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 61
- Makes
- 1
- Views
- 817
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
I was looking for a place to store my Revo nozzles and I thought it would be good to store them under the printer. I could not find anything like what I wanted, so this is the result.
There are two versions: 1 that is open on the sides to match the Voron design more closely and a filled in side to make it easer to print. I ended up using the easy one for myself.
I have printed it in ASA, PETG, and PLA and they are all fine, so I do not think the material matters.
The feet use 5M bolt inserts that I had to drill with a 6mm drill bit to get to insert correctly.
The feet are designed to use a 5M, 10 to 20 mm in length flat hex bolt with a standard nut. I printed them in TPU, no supports required.