Voron V0.2 V0.1 Stand with Drawer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Voron V0.2, V0.1 50mm tall stand with a drawer to hold supplies.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 61
- Wydruki
- 1
- Wyświetlenia
- 817
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I was looking for a place to store my Revo nozzles and I thought it would be good to store them under the printer. I could not find anything like what I wanted, so this is the result.
There are two versions: 1 that is open on the sides to match the Voron design more closely and a filled in side to make it easer to print. I ended up using the easy one for myself.
I have printed it in ASA, PETG, and PLA and they are all fine, so I do not think the material matters.
The feet use 5M bolt inserts that I had to drill with a 6mm drill bit to get to insert correctly.
The feet are designed to use a 5M, 10 to 20 mm in length flat hex bolt with a standard nut. I printed them in TPU, no supports required.