Wet Palette (redux)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I couldn't find 4mm magnets anywhere so redid the design to use the ones I could find: 3mm thick, 7mm diameter (2.6mm…
- Rating
- 5 / 5
- Likes
- 34
- Downloads
- 213
- Makes
- 1
- Views
- 1,916
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I couldn't find 4mm magnets anywhere so redid the design to use the ones I could find: 3mm thick, 7mm diameter (2.6mm and 6.5mm measured with my cheap and cheerful calipers) neodymium. 8 are required - 4 in the base and 4 inserted in the frame, pausing on the 20th layer (depends on layer thickness).
I also added tabs to keep the lid on and closed when in transport.
Enjoy.
Print instructions
Printed with PETG, no supports required, orange and metallic bronze prusament in the photo.
When printing the frame, pause the print to add the magnets.
I've added GCODE with the necessary pause included, generated for PLA with 15% infill, 0.2 layer height (Prusa defaults).