Lens cap 34mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spring-loaded lens cap for my Industar 50-2 50mm f/3.5 camera lens. It should work fine with all ⌀34mm lenses.
- Rating
- 4.5 / 5
- Likes
- 20
- Downloads
- 142
- Makes
- 2
- Views
- 888
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
Spring-loaded lens cap for my Industar 50-2 50mm f/3.5 camera lens. It should work fine with all ⌀34mm lenses.
Print instructions
I made this one as I prefer a spring-loaded inner cap, if you prefer an outer one, go for https://www.thingiverse.com/thing:2133519.
Notes
The thing was designed with ABS flexibility in mind. PLA might be too rigid for this design (ie. "springs" might require uncomfortable amount of force to operate).
Post-Printing
After printing, one needs to:
- glue the middle of the springs to the main body (the red to the blue part),
- glue the inner walls to the body (the yellow parts into the blue one).
If one's printing the thing of ABS, then a single drop of acetone suffices as an adhesive (or rather solvent).