Detachable Bahtinov Mask for Meade SN 10in
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.12 – €0.14 net (excluding VAT)
For file: Top_x6_0.2mm_PETG_MK3S_10m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.13 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 9.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Detachable Bahtinov mask for Meade SN 10in (F 1016mm, BF200)
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 55
- Makes
- 0
- Views
- 362
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Share Alike
Detachable Bahtinov mask for Meade SN 10 inches (F 1016mm, BF200).
The mask is designed for a focal length of 1016 mm with a Bahtinov factor of 200.
It works well with a telescope inner diameter of 297mm, where it adjusts and self-centers by the flexible arms.
I used PETG from Prusament, which guarantees adequate flexibility in the arms. With other materials, PLA for example, I don't think you will have any problems.
I have separated the orange pieces (Top) that need to be glued. They are ideal for finding them at night in the dark.
To disassemble the mask, you will see that it is very easy, once you unscrew the nut, make a few small oscillations in the parts. It is not necessary to screw the nut tightly.
You will find the .stp file for the model, in case anyone likes the mask design and wants to adapt it to their telescope.
Have good skies!!!