1 / 4
Gridfinity AFA Deburring Tool Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
AFA Deburring Tool (12mm Hex) Holder for popular Gridfinity Storage System
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 18
- Makes
- 0
- Views
- 310
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is a AFA Deburring Tool (12mm hex) holder for the popular Gridfinity storage system. It's a remix from the 1x1x3 bin and is set up to accept 6mm x 2mm magnets. This utilizes a spring/friction clamp to hold the tool firmly. You may need a drop of superglue to hold the magnets into place.
Print Settings:
- Print in PETG, ASA/ABS, or Nylon (the print needs to flex so the container will be grasped firmly by the spring clamp)
- 0.2mm Layer Height
- 3 Perimeters (1 Perimeter Bottom & Top)
- 5 Top & Bottom Layers
- No Supports Required