1 / 7
Ultimaker Short Belt Tensioner & Spacer — image 1
1 / 7

Ultimaker Short Belt Tensioner & Spacer

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a remix of Mooncactus' and Jelle's Ultimaker Original short belt tensioner.

Rating
0 / 5
Likes
2
Downloads
27
Makes
0
Views
333
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

This is a remix of Mooncactus' and Jelle's Ultimaker Original short belt tensioner. I've moved it to the inside of the machine, with a full spacing of 11mm (someone replaced my wooden spacer with 10mm plastic spacers which wore away at the belt).

For fitting the parts to the printer you'll need four extra M3 bolts:
2x M3x16 (pull bolt)
2x M3x10 (through wall)
I used 4 rings and didn't fit a spring, see attached pictures.

There's one caveat: you'll need to saw a slot in the back of your machine to allow the y+ endstop cable to pass through (I didnt want mine pushing against the stepper motor).

Print instructions

I printed the part with supports, but with proper bridging it should print without.
Settings: I printed with 2mm walls, top and bottom, 20% fill.

Tags