Lion Head by HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Loin Head Filament Painting using the HueForge Software
- Rating
- 5 / 5
- Likes
- 43
- Downloads
- 130
- Makes
- 2
- Views
- 1,152
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial
Try out this Lion head generated using HueForge software! Play around with different colors and swap heights to customize the look.
Instructions for Bambu Studio and PrusaSlicer layer swaps.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
Polymaker Charcoal Black
Polumaker PolyLite Brown
Polymaker PolyLite Orange
Polymaker PolyLite Lemon Yellow
PolyMaker PLA Pro Cold White
Swap Instructions:
Black until layer #4 at 0.4mms
Brown until layer #6 at 0.56mms
Orange until layer #16 at 1.36mms
Yellow until layer #20 at 1.68mms
White until layer #28 at 2.32mms
For additional help, check out the #filament-painting channel in the Polymaker Discord