1 / 4
Bearing based spirographic WDT tool modified
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I changed some dimentions for better printability and the looks.
- Rating
- 4.714 / 5
- Likes
- 132
- Downloads
- 595
- Makes
- 8
- Views
- 8,279
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
BOM is the Same as the original, aside from the 8 magnets I used to hold the basket in place when rotating. (Fits my 18g ridgeless VST basket nicely)
I used blind holes on my design to give the upper part a cleaner look.
The use of a blind hole tap is advised to start ¾ of the thread length, otherwise the part may crack when screwing the M3 Screw in an undersized hole.
BOM:
- 16x Magnets 5x2.5mm (2 stacked on top in each hole)
- 1x M3x20mm SHCS
- 5x M3x12 SHCS
- 2x 61813 ZZ / 2Z (65x85x10 mm)
- 10x MR63ZZ (3x6x2.5mm)
- 10x Acupuncture needle