1 / 1
LM10UU and LM10LUU Extractor for SVO6 Plus and SV06 10mm Z rod mod — image 1

LM10UU and LM10LUU Extractor for SVO6 Plus and SV06 10mm Z rod mod

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a larger design of LM8UU extractor for the SV06 that is designed to fit LM10UU style bearings.

Rating
0 / 5
Likes
17
Downloads
68
Makes
0
Views
954
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

This is a larger design of LM8UU extractor for the SV06 that is designed to fit LM10UU style bearings. I recommend triangle infill.

Instructions from original post:

Print Settings

  • Layer height 0.2mm
  • Sturdier settings, e.g. 1.2mm walls and stronger top/bottoms, 20% infill

Usage (see this video)

  • Remove the screws and washers on the bottom first
  • Align the tool on the top so it touches the top bearing
  • Hit it with a hammer until the bearings pop out on the bottom (there are two per side)

Tags