1 / 1
LM10UU and LM10LUU Extractor for SVO6 Plus and SV06 10mm Z rod mod
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a larger design of LM8UU extractor for the SV06 that is designed to fit LM10UU style bearings.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 954
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 3)Remiksy (0)Kolekcje (33)Powiązane
This is a larger design of LM8UU extractor for the SV06 that is designed to fit LM10UU style bearings. I recommend triangle infill.
Instructions from original post:
Print Settings
- Layer height 0.2mm
- Sturdier settings, e.g. 1.2mm walls and stronger top/bottoms, 20% infill
Usage (see this video)
- Remove the screws and washers on the bottom first
- Align the tool on the top so it touches the top bearing
- Hit it with a hammer until the bearings pop out on the bottom (there are two per side)
