1 / 8
Chimera 7 Pro GoPro Mount with spacers — image 1
1 / 8

Chimera 7 Pro GoPro Mount with spacers

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This concept was sparked by a video shared by Joshua Bardwell some time ago. In his discussion, he mentioned the…

Rating
0 / 5
Likes
5
Downloads
123
Makes
0
Views
487
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

This concept was sparked by a video shared by Joshua Bardwell some time ago. In his discussion, he mentioned the typical issue with GoPro TPU mounts on most quadcopters. They typically rely on a pressure fit, with the top screws directly applying force onto the TPU. Over time, this constant pressure can cause the TPU to tear.

A potential solution Bardwell proposed was to introduce a small brass tube into the TPU mount. This tube would effectively distribute the majority of the pressure back down to the frame, thus reducing the stress on the TPU.

With this build, I decided to experiment with creating the tube from a more durable filament such as Polycarbonate (though I speculate PLA could also suffice). The tubes I've fabricated are marginally shorter (by 0.2mm) than the TPU mount holes. As such, when the screws are tightened, a fraction of the pressure remains on the TPU, but the majority is transferred through the tubes down into the frame.

I'm keen to see how this approach will pan out in the long run. I plan to conduct some tests on my own quad and observe the results. It's crucial to stick with the original screws that have an integrated washer, or perhaps even try a screw combined with a slightly larger washer.

This design is a remix from the original found here: https://www.thingiverse.com/thing:4888524.

PLEASE NOTE: the included 3mf was generated with PrusaSlicer 2.6 beta4 so will throw some errors if you try open it with an older version of PrusaSlicer. The tree supports really help with making this a clean build.

Just a side note: The print turns out to be a tad smaller than the original, yet this variation creates a snug fit when attached to the drone, an aspect I think might be beneficial.

Print Settings

Printer Brand:

Prusa

Printer: 

I3 MK3S

Rafts:

No

Supports: 

Yes

Resolution:

0.1

Infill: 

20%

Filament: Fillamentum 98A TPU and PC for the washers 
 

Notes:

 

GoPro Mount printed using Fillamentum 98A TPU, the washers I experimented making them from Prusa PC Blend.

 

 

 

Category: R/C Vehicles

Tags