1 / 2
Swinging garbage can jar lid
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Inspire yourself to stay cleaned up with this print in place moving jar lid.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 24
- Makes
- 0
- Views
- 327
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Have fun with this model either as a useful can to keep your 3d print area tidy or as a benign fidget toy while searching for inspiration.
Settings:
- .1 - .2 layer height
- Supports- FO sho. I used a gyroid infill at 5% seemed to work great with easy cleanup (sadly the lid has to kind of float to make the hinge work )
- Wall count 2 @ 0.8 width
- Infill @ 10% with gyroid pattern. (could get away with less)
- Print speed 120 mm (reducing speed at higher layers)
Overall took about 2 hours to print. My Mod-t is on the slower side. Results may vary.
Post-Processing:
Using a utility knife. Carefully remove any stringing or elephant feet away from the door. Pull out supports from the bottom around the threads. After everything was cleared out the door swung freely with little slop.