1 / 3
Coin Pocket Utility Knife
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an edc box cutter that uses standard utility knife blades and will fit in the coin pocket of your pants.
- Rating
- 4.857 / 5
- Likes
- 69
- Downloads
- 522
- Makes
- 8
- Views
- 2,542
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
A printable knife made with the following design goals:
- use standard and interchangeable utility knife blades
- as small as possible
- operate with one hand
- “lock” open and close
- reasonably strong
- simple and easy to print
Print Settings
I use the following…
- petg @ 0.12mm
- no support / brims
- note the orientation in the photos screenshot
- the sliding action will feel a bit rough at first, but smooths out with use (a little dab of silicone grease helps a lot)
Updates
- Mar 2024 (v2): cleaned up the models, improved tolerances, added keyring hole, better retention of blade holder when applying a lot of downward cutting force