Serrated glue spatula for edges | Zackenleimspachtel für Kanten
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.00 – €3.67 net (excluding VAT)
For file: Kantenzackenspachtelsatz_0.2mm_PLA_MK3S_3h28m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.34 excluding VAT (range midpoint).
- Weight reported by the author
- 39 g
- Print time reported by the author
- 3.47 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Uniform glue application for edges | gleichmäßiger Leimauftrag für Leimholzherstellung, Tischplatten etc.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 36
- Makes
- 0
- Views
- 225
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
deutsch weiter unten
Uniform glue application for edges
Simply apply glue to the edge and spread it with the spatula. The lateral border keeps the glue exactly where it should be.
You can reduce the amount of glue by using a flatter angle of inclination when moving down the edge.
Simple, but very effective!
I have set models for different edge widths (15, 18, 20, 22, 24, 25, 27, 30 mm).
Print the model you need or the whole set.
With the attached Fusion360 file, you can create your filler in individual width. Simply adjust the parameter [Kantenbreite]. Recommended widths between 10 and 40 mm. The extension ChangeTextParameters is required.
Ermöglicht gleichmäßigen Leimauftrag für Leimholzherstellung, Tischplatten usw.
Einfach Leim auf die Kante angeben und mit der Spachtel verteilen. Durch die seitliche Begrenzung bleibt der Leim genau da, wo er hin soll.
Durch einen flacheren Neigungswinkel beim Abfahren der Kante kann man die Leimmenge verringern.
Einfach, aber sehr wirkungsvoll!
Ich habe Modelle für verschiedene Kantenbreiten eingestellt (15, 18, 20, 22, 24, 25, 27, 30 mm).
Drucken Sie sich das benötigte Modell oder den ganzen Satz.
Mit der beigefügten Fusion360-Datei können Sie sich ihre Spachtel in individueller Breite erstellen. Einfach den Parameter [Kantenbreite] anpassen. Empfohlene Breiten zwischen 10 und 40 mm. Die Erweiterung ChangeTextParameters wird benötigt.