Shower door guide SP9
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.80 – €0.98 net (excluding VAT)
For file: Shower door guide_0.3mm_PLA_MK3S_48m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.89 excluding VAT (range midpoint).
- Weight reported by the author
- 13 g
- Print time reported by the author
- 48 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Coram SP9 style shower door guide replacements.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 18
- Makes
- 0
- Views
- 112
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Public Domain
Coram SP9 style shower door guide replacements.
I find the orientation saved (i.e. up on its point) is the best way to print these out as the layer lines are vertical in use. Can be printed without supports but supports or a raft may be useful if bed adhesion is ropey. I find when this fails it fails nearly finished, annoyingly!
For the other side, just mirror it along the Y axis.
This was made in Tinkercad. Edit it online https://www.tinkercad.com/things/gSyEe4L1gGK