voron 2.4 Z endstop pin cap for reliable Z home
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
to make voron 2.4 Z home result value always reliable and accurate
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 64
- Makes
- 0
- Views
- 1,112
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
put it on Voron 2.4 's Z stop pin, the pin touches the hidden micro switch, so to make the pin higher, so the pin can correctly touch the omron probe in the tool head (omron TL-Q5M or alike), since the probe is slightly higher than the nozzle.
of course, the end z stop must move back about 2-3cm, since the omron probe is quite large, it's difficult to miss.
After this use mod, the printer must run the whole Z Offset Adjustment process (using a paper to run the command Z_ENDSTOP_CALIBRATE ) to find the correct Z offset value: position_endstop in the printer.cfg file.
https://docs.vorondesign.com/build/startup/ Z Offset Adjustment
I provided 4 version of the caps, they have different top thickness, so hopefully will fit your setup (depends on how high you mount your omron probe).
I use 2.8mm version.
the thickness shouldn't be too picky, because Omron probe has a probe range of 0-4mm
you obviously can't mount it 0mm (hit the bed), so most likely the range is about 1.xx to 3.xxmm.
so I think a 2.8mm thick cap should fit most cases.
print:
use ABS to better handle the higher temperature in chamber.
40%