Satisfactory Logo Magnet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made the base a bit taller to make room for magnets (you'll need two 8x3mm) and sized it to 100mm wide as a part of…
- Rating
- 4.75 / 5
- Likes
- 34
- Downloads
- 114
- Makes
- 5
- Views
- 656
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made the base a bit taller to make room for magnets (you'll need two 8x3mm) and sized it to 100mm wide as a part of my 'wall of shame' tribute series to games I've spent too much time in.
Did a color swap between the base and the letters to make it pop.
It's light - if I made it again I'd probably use 6x2mm magnets since they're plenty strong.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
16
Filament: Hatchbox PLA Wood Brown and Silk Silver
Category: Signs & Logos