Validyne DP103 Pressure Sensor Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount to attach a Validyne DP103 pressure sensor to aluminum extrusion profiles using M6 bolts
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 15
- Makes
- 0
- Views
- 140
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution
I made this mount to attach my validyne pressure sensors to a 60 by 120 mm aluminum extrusion with a slot width of 8 mm.
The part has to be printed twice (once mirrored around the z axis in the slicing software). The two individual parts can then be connected using a long M6 bolt and attached to the extrusion with another two M6 bolts. The sensor then just snaps in and sits securely
The holes in the bottom of the model make it easy to bleed the pressure sensor without having to remove it from the mount (using a ball ended allen key)