1 / 5
Earthbound Sprites
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ness, Paula, Jeff, Poo. Modify the PLATE STLs with the COLOR STLs to make a multicolor print
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 48
- Makes
- 0
- Views
- 708
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
STLs will line up automatically in Bambu Studio!
You only need about 2 layers of the artwork so scale the STLs to 0.4mm in height. The 3mf is for Bambu Studio or Orca Slicer. It has a 12x3 (12.25x2.8) negative cylinder and a pause gcode to insert magnets.
You have to scale the STLs in the slicer if you want them to be the same size. I accidentally paid no attention to the sizes when converting them. I scaled mine to 116.25mm in the Y axis to make them perler sized. Make sure you keep the Z scale the same at 4mm