1 / 4
Tilt-in 30x30 T-nut with metal insert / vkládací matice do 30x30 T-profilu, s kovovou podložkou — image 1
1 / 4

Tilt-in 30x30 T-nut with metal insert / vkládací matice do 30x30 T-profilu, s kovovou podložkou

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€0.12 – €0.14 net (excluding VAT)

For file: 3030TnutRugged_0.2mm_PLA_MINI_10m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.13 excluding VAT (range midpoint).

Weight reported by the author
1 g
Print time reported by the author
9.6 min
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

M5 tilt-in T-nut for 30x30 aluminum extrusion with inserted metal washer for added strength.

Rating
0 / 5
Likes
10
Downloads
50
Makes
0
Views
360
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

CZ (EN version follows):

Potřeboval jsem připevnit výztuhu k rámu své tiskárny. Běžně dostupné tištěné T-nut (asi tyto) se lámaly, kupovat čtyři matky přes internet se mi nechtělo a v železářství se jen tak nedostanou. Inspirován vynikajícími Tilt-in T-Nut, které se vsunou dovnitř přes slot (bez rozebírání) jsem vytvořil jejich pevnější variantu. Veškerý tlak je přenášen matkou přes podložku přímo na límec extrudovaného profilu, plast jen vše drží pohromadě a sám je namáhán pouze minimálně.

Varování:  Tyto matky nedokážou plně nahradit originální kovové matice/kameny přímo vyrobené  pro 3030 T-slot extruze. Oproti originálu přenáší tlak na mnohem menší plochu, takže při přílišném dotažení/namáhání může dojít až k poškození extruze! Používejte na vlastní nebezpečí.

Model je určen pro tisk ve vrstvách 0,2 mm, bez podpěr, doporučuji 100% výplň (i když by neměla být potřeba)

K montáži je potřeba šestihranná matka M5 (DIN 934) a podložka M6 6,4x12x1,6 mm (DIN 125). Po vytištění se  podložka vsune do “kapsy” a zajistí matkou vlisovanou do šestihranného otvoru.

Takto vytvořené matky lze vložit a vyjmout do 3030 profilu skrz drážku, není nutno nic rozebírat.

Tinkercad model pro úpravu: https://www.tinkercad.com/things/e4WQ61nR4av

EN: 

The “normal” drop in t-nuts are sometimes too fragile and unable to hold the forces applied (ie to hold Mini Z-brace in place) . Too thrifty to order four T-nuts, ispired by tilt-in T-nuts I fashioned T-nut reinforced by M6 steel washer. The clamping force is directly applied to metal, plastic housing only keeps the nut from falling apart.

Disclaimer: These T-nuts are considered as provisional solution and cannot fully replace original T-nuts, which have much larger contact area with the slot. Overtighting can result in damage of T-slot extrusion. Use wisely, use at your own risk!

Print with 0,2 mm layers, no supports, I printed mine with 100% infill (but it is not needed)

Assembly requires additional M5 nut (DIN 934) and M6 washer (6,4x12x1,6 mm ,DIN 125). Slide the washer to the “pocket” and secure it by pressing the nut into hexagonal hole. 

It is possible to slide the T-nut into the 3030 profile through the slot, no dissassembly is needed.

link to Tinkercad model: https://www.tinkercad.com/things/e4WQ61nR4av

Tags