1 / 5
Motherboard Display Stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Display or storage stand for motherboards or other flat objects.
- Rating
- 0 / 5
- Likes
- 28
- Downloads
- 372
- Makes
- 0
- Views
- 1,685
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Perfect for displaying or storing your motherboard.
Print 2 legs and one crossbar. It is a reasonably easy print, so the settings are up to you. I printed with the following:
- PLA
- 0.6 nozzle
- 0.3 layer height
- Arachne
- 2 walls
- 3 top and bottom layers
- 15% Infill
If you have an exceptionally heavy motherboard, consider bumping up the infill to add some weight.
This remix was not just scaled up from the original; the angle was changed, braces lengthened and adjusted, and a notch was added to support the motherboard properly. The original does work well for ITX boards though.