1 / 4
Diesel Exhaust Fluid Re-filler — image 1
1 / 4

Diesel Exhaust Fluid Re-filler

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a simple tool to allow you to re-use your empty "refill" bottle for your exhaust fluid - this allows you to…

Rating
0 / 5
Likes
1
Downloads
20
Makes
0
Views
471
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

This is a simple tool to allow you to re-use your empty "refill" bottle for your exhaust fluid - this allows you to use lower cost "bulk" fluid.

This printed great with PLA, no supports needed!

Print instructions

Printing and use

I have included both a tall verison and a short version - The tall version takes longer to print, but stays on the bottle. The shorter version is identical, but being shorter - may require the use of Duct Tape to keep it on the bottle. Printing requires no supports. Print either the short or tall version, then print the "cap" parts.

Once printed, you need an empty "blu-def" bottle - here is how I modified mine:








  • This is the style bottle that I used









  • Press the newly printed "bottom" onto the bottle














  • Using the bottom of the printed cap as a guide, drill a hole in the bottom of the bottle.














  • Use a hole saw to cut a hole in the bottom of the bottle. Clean the edge of the hole, then clean the bottle completely.



















  • The cap can either be glued together, or assembled using a 5mm screw and nut. The cap parts have holes and pins to line them up









  • Fill the bottle (from the bottom) with exhaust fluid, put on the cap - and install in the car. Clean the bottle completly after each use

  • </ol>



    Tags