Search results: def

~*THE ULTIMATE*~ Tanto Blade Styled Combat Knife/Short Sword *Self Defense Model* - Fully Printable*

Self-Defense Cat

A self-defense keychain inspired in the cats of sailor moon. Easy, fast and useful print (tbh you never want to use it, but it's good to have the power of the moon at your side) Also, you can change color at the moon layer to make it look…

Default ender 3 cat

Just an stl of the neko cat that is default in the ender 3 sd card. I just made it an stl

Print-in-Place Land Rover Defender

Print took around 20hrs at .16 layer height with %15 infill. The print will get stringing around the top pillars that can be removed with snips or a blow dryer. I'm really happy with the tolerances of the wheels, It doesn't have as much…

Deflector for Festool FS/2 Guide Rail Remix / New version

I was looking for a solution that prevents the suction hose and the cable getting caught on the end of the guide rail when sawing with my Festool TS55 saw. I printed first the excellent model…

Star Wars TIE Defender (Canon/Legends Versions)

Replica of the TIE/d Defender from Star Wars. It comes in two versions. The canon version is based on its depiction in Rebels, the other version is based on its (most common) depiction in Legends. The only difference between the canon and…

Star Wars New Republic Defender-class Cruiser

This is a model of the New Republic Defender-class Cruiser which appeared in the show Star Wars: Ahsoka. One ship of this type was called Vesper . Dimensions Length Width Height 99.6mm 19.5mm 16.4mm The scale is 10,000. Included is a…

Defa MiniPlug Halter

De: Dient dazu, den Stecker des Defa MiniPlug Anschlusskabels sicher zu verstauen, während er nicht benötigt wird. Zusammenbau: Wird mit vier M4x16mm Zylinderkopfschrauben ans Kabel geklemmt Druckeinstellung: 0.4 Nozzle 0.2mm Layer Height…

Land Rover Defender TD5 Stereo Surround

Replacement stereo surround of for the Land Rover Defender TD5. Print instructions Material: PETG Layer Height: 0.3mm Infil: 30% Perimeters: 4 Top Layers: 3 Bottom Laters: 3 Support: Yes

Self-Defense Red Panda

Because the first one was relatively succesfull, i think I'll post the other models that I have created Another self-defense keychain inspired this time in a cute Red Panda. Again, you never want to use it, but it's good to have it. With…

Prusa XL - 0.3 Nm Nextruder Torque Wrench for the default TX 8 Torx key

Why 0.3 Nm? source: The right Torque for your Prusa XL Nextruder Nozzle by INVESTEGATE Printing open the PrusaSlicer file as project print the objects using PETG (DON'T throw the purge, may it is needed later). Object torque-case-B is…

Corona defeater, covid-19, SARS-CoV-2

Print it out and give it to your friends, we will defeat the disease! I gave it to the delivery drivers, these people now have a hard job. V1.1: added a stand inbuild little support V1.2 little better support added a ring Print…

August smart lock pro 3rd gen: Defiant adapter

August smart lock pro 3rd gen: Defiant adapter. ran into an issue when i got my new august smart lock where i did not have the correct adapter. I saw they were $29.99 on august site and did not want to pay and wait for shipping so i…

Land Rover Defender TD5 Switch Blank

Blanking plate for holes in the dashboard of the Land Rover Defender TD5 (This may fit other models) Print instructions Material: PETG Layer Height: 0.2mm Infil: 20% Perimeters: 2 Top Layers: 4 Bottom Laters: 4 Support: Yes

Skull: Artificial cranial deformation in Tiwanaku

Skull : Replica of Artificial cranial deformation found in Tiwanaku Artificial cranial deformation (ACD) was practiced in Tiwanaku , an ancient civilization centered in western Bolivia that thrived from around 500 to 1100 CE. How was it…

Defender Construction Toy

This is a simple, Defender style car toy that allows the user to use a simple wrench to turn nuts and bolts to assemble components. The basic print requires 1 Body, 1 Frame, 4 Rims, 4 Tires, 4 Axle Nuts, 2 Bolts and 1 Wrench. The Bumper…

Kayak with paddle 1:10 for Traxxas TRX 4 Defender

Hello, I have a Kayak with a paddle 1:10 for Traxxas TRX 4 Defender . A very nice accessory for a 1:10 RC car. The kayak is fully authentic in 1:10 scale. Including oars, it even floats. Good luck with the printing! I used PLA/PETG as the…

Leonidas self defense ring

Fast printing and requieres less than 3 meters of filament. I've modeled this ring as a tool for self defense and to use my last meters on the rolls. I've printed a lot of them with filament leftovers and gave them to my neighbors and…

Fractal Design Define 7 front fan duct

Fan duct for 140mm front fan for Fractal Design Define 7 computer case. It helps keeping the GPU and m.2 ssd a lot cooler when using for example Noctua 140mm PWM controlled fan. My GPU was overheating all the time, Define 7 doesn't have…

Tensegrity Structure for Gravity-Defying Moss Garden

A tensegrity is a stable configuration of bars and cables. The bars don't touch each other and are only connected via the cables. If the cables are very thin compared to the bars, the bars seem to float in mid-air. The position and length…

Defibrillator box- scale models for diorama 1/14, 1/16 ,1/12,1/10

Print lying up. Upload your makes, i would love to see them.

Přepracovaný držák rezervy Traxxas TRX4 Defender

Držák rezervy na Traxxas Defender TRX4 bez plastových kanystrů a heveru, který bránil světlům. potřebný spojovací materiál:

Definitely Not A Mimic Dice Tray

This is a hexagon shaped dice tray, 29mm high (1.16") and 150mm wide (5.94") with a raised edge and thick wall for rolling your dice inside. Inside the tray, there is text and an image that says "Definitely Not A Mimic" and that's about…

emergency keychain car window defroster

a small defroster made to use on your cars windows. you can keep it on your keychain, though i do reccomend taking it off of the keychain before use. I reccomend printing with at least 30% infill, as it will probably snap on anything…

Abdeckung für defekte Sockelleiste Küchenzeile

Beim nächsten mal würde ich den Teil, der hinter Sockelleiste ist unterbrechen. 2-3 Klemmen reichen statt durchgehend.

Sprinkler Shield/Guard/Deflector

Simple sprinkler shield. I printed out of ASA using a 0.8 nozzle. This is designed to use Landscaping Spikes or Gutter Nails to hold it in place. You could even use tent pegs or most anything, I suppose. The V2 version is the one with the…

RC T98 Land Rover Defender shock absorber shims

Hello, Welcome to my profile, full of models and miniatures :-) I have for you RC T98 Land Rover Defender shock absorber support. Raises the car by at least 10mm!!!...the lift is really noticeable and the car is also more stable. It…

Fractal Design Define Mini C GPU fan duct

When installing my brand new 32cm GPU, I had to remove the front fan and air flow was missing. GPU was throttling. This fan duct is installed in the bottom, where 3.5" HDD tray is normaly set. Now GPU works as expected (with added…

HVAC vent deflector shield

A design born of necessity. The floor vent in my bathroom is right in front of the toilet against the wall. In summer, the AC freezes my feet, in winter the heat from the furnace directly below scorches my toes. Enter the HVAC deflector…

BMW M4 (G83) Wind Deflector Plug

Wind deflector inserts for the BMW M4 Convertible (G83). Tab of the insert presses the sensor wire in the slot which allows automatic top operation without the wind deflector installed, which is required for the US model. The car needs…

Fractal Design Define Mini C 120mm fan Moduvent

When installing my brand new 32cm GPU, I missed air flow and needed to add an output fan. I put it in rear top and designed this moduvent to have a nice finish. This moduvent will also accomadate my 3.5" HDD top mouted tray (see other…

This Was Inevitable – CTRL+Z Defined

Part of the 5 O’Clock Buddies Series Something goes wrong. You panic. And without thinking, your hand moves— CTRL+Z. But this time… it didn’t work. Just a routine cleanup. Until the file was Human_DNA_Final_V3.sys. And the cosmos started…

Meat Defrosting Magnet

I will sometimes put meat in my microwave to defrost during the day since I can't leave it on the counter with my pets, so I made this magnet to not forget. Takes two 6mm diameter/3 mm height magnets. I did a simple color change on the…

Top Cover for Weatherdefyer Umbrella

On an old Weatherdefyer umbrella, I once got at a conference in Seattle the top cover got lost. This part replaces it and can be screwed on top of the umbrella with a M3 machine screw. I printed this with PETG since this is expected to be…

Spot LED cozy deflector

This deflector is made to be mounted in existing ceiling LED lamp. it redirects light horizontally to create indirect lighting of your room. I use it in my bathroom for a cozy feel. Print in ASA is recommanded to prevent for deformation…

15° Deflector for Scent Diffuser

I don't like how this turned out. I was going for 30° of deflection, but 15° was all I got. So go instead with my 80- or 90-degree deflectors, which work beautifully. Instructions Print without infill, without solid top layers, and…

80° Deflector for Scent Diffuser

A not-quite-right-angle elbow to deflect the stream of sweet-smelling vapor coming out of my diffuser.

Catchmaster DEFIANT Liquid Ant Bait Cover

Cover for Catchmaster DEFIANT premium liquid ant bait from amazon: https://www.amazon.com/dp/B0D9MTJK6W?th=1 Fits over the trap with room and tiny doorways for the ants to get to the bait but makes it harder for kids and pets from…

Self Defense Knuckle Spike

The Self Defense Knuckle Spike is an ergonomic self-defense tool designed for both striking and stabbing. Crafted to provide versatile protection in perilous situations, this tool enables effective defense against assailants. With its…

Tie Fighter Defender Kit Card

This is my kit card interpretation of the TIE Defender. Check out my other models printed giant sized featured on The 3D Printing Nerd We love the Star Wars Kit Cards by benzz88 Edabot Nakozen and delman83 This was made to fit when…

Definitive Collection of Battery Holders (Gridfinity, Stackable & Labelled)

The containers are designed to be used independently or with Gridfinity baseplates . The bottom has magnet holes for magnetized Gridfinity baseplates. The containers when fully loaded are stackable. The battery model number is printed on…

Cyberpunk 2077 - Tsunami Defense Systems Gun

Gun inspired by Cyberpunk 2077 poster and real guns (Colt, Berett, CZ 75 Shadow Line). There is enough space inside for electronics, to add red and blue LEDs to the right side. Plus has movable parts, where rubber bands need to be added,…

Reusable Defrosting Hex Scraper

Popular hexagonal scraper - now for defrosting car windows You can choose between a regular version of the scraper (which is in one piece) and a version with replaceable "blades". Both modified to make the scraper stronger and to allow…

DeFrosty The Snowman

Drag the files in as 1 object and color as you wish. You can even do this with a basic single extruder style printer and just pause at a certain height and change to black filament to do his hat and eyes etc. Alternatively, you can print…

Kobra X Filament Deflector and Waste Bin

Anycubic Kobra X filament deflector and waste bin. The filament deflector mounts directly to the back of the filament extractor and is secured with screws. The filament waste bin is designed to fit snugly next to the Kobra X. It sits…

Night Raids Ultimate Karambit Knuckle Duster *Fully Printable* ~Multi-Color Night Raid Logo Imprinted~ | THE FIRST AND LAST Self Defense Model You Will Need |

Defiant - Defiant Class

This is 3D printable model of the Defiant Class NX-74205 Defiant from the Star Trek. It is a kit. The different colored parts are separated for easier printing. Pieces of some details need to be separated into separate models in the…

Bambu Lab A1 Series - Complete Purge System - Poop Bin - Trash Bin - Purge Deflector

BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! Hello Everyone I designed the "Complete Purge System" in two versions for Bambu Lab A1 Series printers. The first…

QuadBee - Defend Your Country!

QuadBee - Defend Your Country! Slava Ukraini! All funds gained from donations and affiliate commission will be going to Ukraine. This listing is for the printable model/CAD files. The full project source of truth lives on GitHub, where…

DEFINITIVE - iPhone 15 Pro - CASE

Adjustable Vent Air Deflector

Print each half to lie on its end so that no supports are required. When printed slide both halves together and adjust size. Side and back lips go under vent register so no magnets are required.

Window defrost dash vent VW/Skoda/Audi/Seat

Window defrost dash vent VW passat b5/5.5 (golf IV), Audi B5/A4/A3 (8p1). Seat (leon/toledo),….. (only modeled, untested. Sorry) driver's side the passenger side must be mirrored Print instructions Unassociated tags: audi a3, b5.5, golf 4…

spike and defuser valorant

this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing

Makita Festool Track Saw Dust Collector Hose Deflector FS-AW

This is a remix of ShapeLabs's track saw hose deflector design, which was then updated by Mak-E-Verse and made compatible for Makita tracks/rail guides. Both original designs are based off of the Festool FS-AW available for their rail…

Floating Gravity Wine Bottle Holder - DEFY GRAVITY!

Check out my Amazon Page to see what kind of gear I use to make these models! VIDEO: https://www.youtube.com/watch?v=1YpuNLxkGPs Defy gravity with this awesome wine bottle holder! A classic woodworking project, now you can make one with…

Skeleton - Heavy Infantry - Axe + Round Shield - Defensive Pose

Part of a FREE 3D-printable miniatures project you can find at https://www.patreon.com/DungeonWardenMiniatures Your support is vital to the survival of this project. Thank you :) FDM-compatible (the smaller the nozzle, the better the…

Skeletor Bust High Def Pre Supported Lychee Pro

Just added supports to make it easy for beginners.

Rocket Pen Launcher Turret - Desk Defense

Consider following me on Instagram (@SMACKMAX_). I try to post all of my projects to build a portfolio of my projects. https://www.instagram.com/smackmax_/ ---------------------------------------------------------------- 16-10-2024 small…

Defender 1/18 Recovery boards for Traxxas TRX-4M (TRX4M)

1/18 scale version of the original 1/10 by MrStolarsky. Pins were re-aligned and the whole board was made stackable. I test printed mine in resin and they came out awesome. I designed hangers for the Traxxas TRX-4M Defender, to hang a…

Self Defense Keychain

A Self-defense keychain. Just a Info, this could be illegal to carry in some jurisdictions in the World. Check your loc

Azog the Defiler bust

If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint

Natural, creatively deformable leaves matching roses etc.

A standalone design that beautifully complements the design of the thorny rose stem, but could also go well with other flowers. The sheets are simply printed flat on the print bed, also with a colour change. The twist of the matter is…

Self defense cat keychain

If someone wants to contribute with a small donation: https://paypal.me/JoaquinMartinez01?country.x=AR&locale.x=es_XC

High Definition Designer Lithophane Moon Lamp (HD / Full Resolution / High Quality)

This is a high definition recreation of the original and beloved Designer Lithophane Moon Lamp by Frank Deschner ( @FrankDeschner ). M aybe a gift. This is easy to print. This is an eye catcher. This is a remix. Globe: 21 cm / 8.2 in…

Deformable Roses for thorny stem with nice leaves

In the print settings tab select “ Spiral Vase mode”. A little over-extrusion width (e.g. 0.6 mm for 0.4 nozzle) does not hurt, then it is more stable. The files were provided by Lucretia @bergfex55_505553 in order to be able to present…

Creality Space Pi Plus Heat Deflector

Update: 2025-05-15 I've removed the bambu exclusive restriction and have set the license to allow remixes. Have seen a few other variants out there, but wanted something that was a little more minimalist as I have no need of silca bag…

Gravity Defying Ramp (Rolls UPHILL!)

The double cone object rolls UP the ramp due to their physical properties. To learn how this works, watch my YouTube video explaining everything here as I designed this for that video :) Please heart this design if you like it as it helps…

120/140mm fan deflector (STL+OpenSCAD)

This fan duct will redirect air flow from 120mm/140mm fan at an angle. For example this can be used On the back of your PC to the VRM area on your motherboard. This is required when you're using water cooling, which could reduce cooling…

wide deflectors Anycubic Vyper printhead

A simple printhead case replacement for Anycubic Vyper. Main goal was to allow makers to “see” easily when the small strain gauge led is lit (to avoid print head crash into bed). Then I replaced stock air deflectors with wider ones that…

Snapmaker U1 Poop Deflector

The Snapmaker U1 has a bad habit of throwing its poop over the edge of the bucket. This deflector connects to the nozzle wipers and creates a barrier to help guide the waste filament into the bucket. Features: Can be printed without…

Anycubic Kobra 3 Max Poop Deflector & Poop Bucket

This poop deflector is a simple, lightweight accessory that slides onto the right side of the X linear rail of the Anycubic Kobra 3 Max. Its role is to redirect purge blobs and filament ooze away from the motion system and bed, guiding…

Skeleton - Heavy Infantry - Sword + Square Shield - Defensive Pose

Part of a FREE 3D-printable miniatures project you can find at https://www.patreon.com/DungeonWardenMiniatures Your support is vital to the survival of this project. Thank you :) FDM-compatible (the smaller the nozzle, the better the…

Defense Knuckles

Defense Knuckles - six spikes

Self-Defense ring cat

English These are self defense rings inspired by aliexpress metal rings. Needless to say, please do not use in any way other than self-defense. Recommended Parameters Perimeters: 3 layer height: 0.18 Infill: 60% - gyroid Supports: no…

A1 / A1 mini poop deflector / purge deflector

Print with 0.16 mm layer height , no support An extra plate can be printed from PETG or TPU and clamped into the deflector. This prevents the purge from sticking to the deflector. If the plate does not lift, simply glue it in place. The…

Llavero Gatito Autodefensa

Frente a la necesidad de autoprotegernos en esta sociedad que nos asusta cotidianamente, aquí está el llavero con forma de gatito para la autodefensa , y llevarlo con las llaves. Dimensiones: 52x78x4 mm La dimensión de los ojos, donde se…

QIDI X-Max 3 Cura 5.5 Definitions

If you dont know how to import your QIDI X-Max 3 to Cura, you can use the following instructions. If you already have a 3D Printer in Cura, just go to your configuration folder . Help → Show Configuration Folder Extract the files from the…

GPU support jack (definitely)

Reasons to make a remix: Added a low-profile base to decrease minimal height to 72 mm Needed a flat bottom for an uneven surface Angular design Configurations: Low profile base + short screw: 72mm - 108mm Normal base + short screw: 80mm -…

Side and corner pieces for the default honeycomb wall

Its side and corner pieces for the default honey comb wall

Definition of IT-Support

The definition of IT-Support. Props to the Orignial, it was so good i needed to make a remix of it. Can be printed with no AMS, with just one filament change. Edit: Now with corrected spelling of Wizard.

Deflector compatible waste poop bucket (Bambulab A1, A1 mini)

I was looking for some cool waste box for my A1, but haven't found version that both looked cool and was compatible with extra supports needed when you use AMS on the top and used deflector instead of huge wall. Hence designed this little…

self defense punch dagger

Flork KeyChains - Llaveros Deformito

La impresión 3D se llevó a cabo con OrcaSlicer y Klipper. Altura de capa: 0,3 Velocidad: 120 mm/s Relleno: 5% Tamaño de la pieza: X: 60 mm - aproximadamente. Y: 60 mm - aproximadamente. Z: 30 mm - aproximadamente. Disponible también en:…

Defiled K1 Max Riser with filament relocator

I liked Peter Mastren's idea of relocating the filament sensor as a pass through. Used his layout with the remixed K1 Max Riser I made and came up with this. I also added the cutout to make it easier to remove/reset the lock washer.…

Defender 1 inch RC wheels for Traxxas TRX-4M (TRX4M)

Wheels for the Traxxass TRX-4M Defender. All fit the original rubber and have the same offset as stock by default. Alternate versions with +X push the wheel out by Xmm, the wheel sits further out. -X brings the wheel closer to the body by…

Idefix (Asterix & Obelix)

A new 3D figurine generated by AI, Idefix, from Asterix & Obelix. Asterix & Obelix figurines are here Do not forget to LIKE, to download and to upload your makes, thanks ! Powered by Image-to-3D from MakerWorld…

Ender 3 S1 Pro heated bed cable deflector

This is one of the first accessories I designed for my S1 Pro. If you own one you probably know what this is for. I've been using this for a year and I have none of the typical cable insulation damage nor have I ever grabbed the y-axis…

Saint Michael the Archangel Statue _ 3D Scan - High Definition- v2.2

UPDATE: 2026 NOVEMBER 10 ------------------------------------------ Two passes of LLM powered deep repairs were conducted to improve quality of model while adhering to 99.3% triangular accuracy to original model. I will upload repair PDF…

Revolver Sci‑Fi Ornamentale – Prop 3D ad Alta Definizione

Descrizione Un revolver futuristico dal design aggressivo e ricco di dettagli, pensato come modello 3D da esposizione, cosplay o collezione. Il look unisce linee meccaniche, superfici scolpite e uno stile sci‑fi/gotico che valorizza molto…

Defense Knuckles - Classic

Defense Knuckles - classic

Moto Guzzi V85TT anti-turbulence deflector

similar deflectors are available for sale but not in my country and for a (in my opinion) much to high price so i made some myself. Haven't tested them yet, this is the first prototype. I already found things to change so be warned: this…

V2 - UPDATE: TRUMA Heater Airflow Deflector for Motorhome – 360° Adjustable Direction

UPDATE: V2 Da die vorherige erste Version nach Benutzung und anschließender Fahrt mit dem Wohnwagen immer wieder herausfiel oder sich sehr leicht lösen ließ, habe ich mich dazu entschlossen das Teil so zu modifizieren, dass es nun in die…

Shoehorn Shoe Horn Schuhlöffel Shoespoon - Deformable in Oven

Hello Makers, i designed an easy to print shoehorn, which can be heated and shaped in the oven. LEAVE A LIKE IF YOU LIKE IT <3 Print settings: no support no brim 3 perimeters 25% triangle infill about 1,5mm thick solid layers for Bottom…

Defiled K1 Max Riser

K1 Max Riser remix with tighter tolerances and fillets. Matches my filament sensor relocator remix/mashup. This will work with the standard K1 Max Riser Bar.

The Defender - Owls & Dragons

A brick-wall of an owl that is fearless and calm. A funny DND idea I had. Collect them all! Over 20 Owls available!! COLLECTION HERE: https://www.printables.com/@TripleGWorkshop/collections/2198626 Tree Supports on build plate only…

Land Rover Defender (L663)

Land Rover Defender (L663)

Defender Light guards for Traxxas TRX-4M (TRX4M)

Front light guard for my Traxxas TRX-4M Defender. I printed mine in resin and glued them on. Print some spares as the thin tubes might get broken in print (0.5mm in diameter). I printed 4 at a time and one guard had one bar broken.…

Latching Anti-Cat Power Button Cover for Fractal Design Define R7

My cat, Ghost, has taken to perching on the tower (GPU water cooling exhaust on top) and when she wants to play or is watching out of my room she had a tendency to stand RIGHT ON THE BUTTON! So, taking inspiration from RangerYogi's cover…

Pirate Ship : Definitely not a benchy

GOOD LUCK PIRATE SHIP. Good luck printing it. If someone actually prints this successfully .. wow... please share how you did it. ITs hollow but thick enough to print. Has stairs going down to lower deck.

Side piece for the default honey comb wall

After downloading the files from the original post, I was missing the side part, so I made it. Thanks to the author!