1 / 2
Rook X & Y Motor Switch MOD
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a switch mount that mounts on the motor of a rook so that you can use a old board if it dose not have end stops.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 45
- Makes
- 0
- Views
- 505
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This is a switch mount that mounts on the motor of a rook so that you can use an old board if it does not have end stops on the board.
The mounting holes are for a KW10-Z1P Micro PCB 2239 switch and are typical at 15mm on the center.
There is a moded Rookery with an open are of 26.6mm and allows for standard V6 block to fit.
You use the existing holes on the Rook to mount it all.