1 / 2
DFRobot DFR0287 Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case to hold an Arduino with the DFRobot DFR0287 shield.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 19
- Makes
- 0
- Views
- 245
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is a part of my DFRobot DFR0287 project. I have been looking for a case for the DFR0287 shield but have never been able to find one so had to learn some fusion 360 and make it myself.
The only hardware needed are three 3M 0.5 MM screws. The snap fit case is really tight and hard to fit (and take apart), I'm still learning how to do the snap fit cases.
The Joystick is really loose and might fall off.
There is access to the reset button if needed.