Counting matching models…
This is a small case for an Arduino Uno with the DFRobot LCD Shield. It has some extra space to one side to store some small additional circuits inside plus there's an opening for external wires. Mount the shield and top/bottom case parts…
This exists because I am procrastinating on making progress with python, Linux and learning to better utilise my pis. I have driven this around my house using a pi & Adafruit motor hat like a little FPV car, controlling it from my PC, and…
Enhance the safety and aesthetics of your FireBeetle 2 ESP32-E with specially designed 3D-printed case! Tailored to fit both header-equipped and headerless boards, this case offers robust protection while maintaining easy access to…
This is a remix of " WaveShare 7.5" e-Paper case - symmetrical borders " by ASW. Charging can be done via USB port without opening the frame. Additionally, a tilted version is available. Update 2024_10_09: Added the forgotten…
This case fits the following combination of parts: Raspberry Pi Compute Module 4 IoT Router Carrier Board Mini (https://www.dfrobot.com/product-2242.html) Waveshare 19623 CM4-HEATSINK Raspberry Pi Compute Module 4 Four 15x2.5mm standoffs…
Arduino Ultrasonic sensor adaptor. 2 models: Generic and DFRobot module
A small box created to fit a ESP32 C3 super mini + DFRobot mmWave Radar (SEN0395), in my case for use with ESPHome. It has a snap fit lid with slots to make it easier to get off again. I've added my parameterized Fusion360 file for easier…
Carrier for the DFROBOT Solar Power Manager 5V
A simple case for the DFRobot 8 Megapixels USB Camera, that i am currently using for my Octoprint webcam. You will need one small 2.5-3mm self tapping screw to mount the tab to the case. I o designed it to mount to any of the many…
See also the FreeCAD File if you would like to change something.
For my first robot project I want to use the URM37 ultrasonic distance sensor from dfrobot. So the first thing to do was to design a good housing for the sensor and make it attachable to a servo. Category: Robotics
4 brass insert nut M3 4 M3 1.5cm screw 1 test board 2 5x1 female header
To assemble the case, you will need: Four M2.5x10 standoffs Four or eight M2.5x6 screws (optional) Four 1.6mm spacers between the CM4 and the router board Print settings: Material: PETG Layer height: 0.2mm Walls loops: 3 Top/bottom…
I used BHCS M3x8 bolts to affix the card to the print, and made the existing holes smaller so that the M3 bolts thread into them. Using BHCS bolts meant that the bracket for the top case retention screw has to be bent a little; this may…
Small box for the 1602RGB LCD from DFRobot. Requires: 4 x 16mm M3 screws 4 x M3 nuts Print Settings Printer: Voron V0 Resolution: 0.2mm Infill: 15% Filament: add:North PLA Notes: Not really important, print with whatever settings you have…
Case for DFRobot's Raspberry Pi Compute Module 4 IoT Router Carrier Board Mini. This design uses M2.5 and M3 brass threaded inserts. They may be omitted when the hole diameter is decreased. You will need to download the design file and…
Touchscreen assembly for DFRobot 5" 800x480 TFT DSI touchscreen + Raspberry Pi and interior space for Pi HAT. Requires: 4 M2.5x20mm screws for the back of the case 4 11mm standoffs between Pi and HAT (can be printed) + 4 M2.5x20 screws 4…
The PCB has enough space in the housing because I use various sensors in addition to the BLE beacon, all of which are different sizes. Create with solvespace have fun
As small as possible enclosure for the DFRobot Beetle ESP32-C6, with cutouts for USB and wires for connecting a ledstrip. Created for my Matter over Thread Ledstrip firmware on Github This is the ESP32:…
an adjustable display mount for the DFRobot 5" TFT display.
Designed in Onshape: https://cad.onshape.com/documents/154f6352c0684ad1f6c7c213/w/fc14bd7f4f4cbd5dd5e331f6/e/c244bb19735c4b2673d084b6?renderMode=0&uiState=63bde45d48f6084327e491f7 Display: https://www.dfrobot.com/product-2107.html ESP32…
Files to build the case for the DFRobot Raspberry Pi Compute Module 4 IoT Router Carrier Board Mini (see: https://www.dfrobot.com/product-2242.html ). I reviewed this routerboard in May 2021 (…
I built this little robot enclosure for my offline voice recognition module as I thought it would make it fairly cute looking. I'm using it for a bunkbed control unit for my little girls to allow them to control the lights and the colors…
This is a case for DFRobots Raspberry Pi Compute Module 4 IoT Router Carrier Board Mini split into two parts; top and bottom. The case is held together without using any screws. Link to dfrobot website:…
D1 Mini ESP32 + DFRobot SEN0395 wrapped around an Apple form factor wall wart. For my money this is the perfect bathroom occupancy sensor. Bathroom outlets are usually about chest high and in my house face the toleit and shower areas. It…
This is a really simple friction-held case for DFRobot's DFR0971 2-channel DAC.
UPDATE: added the mounting plates This is the Thai Makerspace pipe clamp I referred to: https://www.thingiverse.com/thing:3161549 although I use this one for light jobs like this: 25mm Pipe Clamp This case was specifically designed for…
Remix to make the DFRobot iot router case rack mountable, also added cutout for wireless antenna
Mount to keep the pins on the DFRobot Romeo V2 board elevated off work surface. Instructions Designed in Fusion 360. Printed in PLA on Replicator 2 with standard resolution but 25% infill for more stiffness. Use M3 screws to mount (works…
A snugly-fit replacement camera mount for the crappy laser-cut acrylic board provided by DFRobot.
In addition to the DFrobot board, expansions can be installed in this housing. The board dimensions for the first and second mounting levels are also available for download. More information and electronics design at: http://www.averon.pl
I recently purchased a DFRobot Devastator Tank kit and a corresponding Romeo ESP32-S3. I didn't realize the mounting holes were different between the different Romeo variants, so I modeled an adapter to bridge between the two. For this…
Technical Description / Technický popis English Version Basic Protective Box for DFRobot Gravity Expansion Board (Raspberry Pi Pico) This is a functional enclosure designed specifically for the DFRobot Gravity Expansion Board for…
A simple bumper for the DFRobot micro:Maqueen robots. To be mounted with six M3x8 screws.
This is a part of my DFRobot DFR0287 project . I have been looking for a case for the DFR0287 shield but have never been able to find one so had to learn some fusion 360 and make it myself. The only hardware needed are three 3M 0.5 MM…
About Models for helping making designs for enclosures which use DFRobot Gravity push buttons such as: DFR0785 series - round ones, link DFR0785-B DFR0785-G DFR0785-R DFR0785-Y DFR0785-W DFR0789 series - square ones, link DFR0789-B…
MrFox recently got himself a new toy; A DFRobot Huskylens 2 and wanted to mount it to his faithful old DFRobot Maqueen Lite v5 . It is quite a tight fit between the wheels and the micro:bit slot. Print two plates. Mount the bottom plate…
General purpose case for TBS Unify Pro 5G8 HV VTX. Designed for mounting on DFRobot Devastator robotics kit, but could be used for other purposes. I used 4 x M3x16 screws and 4 x M3 nuts, but would recommend using M3x18 screws or longer.…
Enclosure for the DFRobot USBtinyISP V3.0. Requires 4 M3 inserts, and 4 M3x10 or M3x12 countersunk screws.
This is a simplified 3D model of a DFRobot DC-DC multi-output step-down buck converter. I created/used it as a reference model while designing the enclosure for a volcanic drone payload project. The model is mainly intended for mechanical…
Magnetic mount for the DFRobot SEN0481 “Magnetic Switch”: https://wiki.dfrobot.com/Magnetic_Switch_SKU_SEN0481 Uses 2x 8x3mm round magnets - the same kind of magnets used by X-Axis Visualizer Indicator for the Prusa Mini. The hole for the…
I've included a few different bases for different mounting styles. Use M3 threaded inserts after printing, and fasten with a M3x8 screw. Use supports when printing the top.
Almost the same as my previous post; in that post, I had used a flat lipo battery. However, since I couldn’t get much efficiency from flat batteries, I redesigned the case for 18650 lipo batteries instead.
This is a Mod of Pied Pipers Upstream Model - Thanks! I've adjusted this to the FireBeetle 2 ESP32-C5 (5 GHz Wifi!), added a wall and a few mounting options. All Parts (except the Gasket) printed with PETG 0,2 Balanced Profile. The Gasket…
This is a simplified 3D model of a DFRobot Gravity lightning sensor. I created/used it as a reference model while designing the enclosure for a volcanic drone payload project. The model is mainly intended for mechanical fitting, layout…
I preferred the Beetle ESP32-C6 because it has a built-in voltage divider, so I prepared a 3D model compatible with my chosen microcontroller. My goal is to eliminate single-use battery usage, which I believe is increasing as smart home…
I was hooked when i saw Michael Klements video on the 5" rack. I could not find this file anywhere to print out and i had already built it. I decided to fumble my way through and make this one.
My latest project used this great display from DFRobot (there are clones) and I spent some time getting the holes lined up for the display and the buttons, so I thought I'd share the template. Use this in your own design to get things…
Raspberry Pi CM4 DFRobot Dual-Ethernet Fan Case Description Case for RPi CM4 using DFRobot Raspberry Pi Compute Module 4 IoT Router Carrier Board Mini Added a 25mm DC fan mount to the top of the case. Added a 50mm DC fan mount to the top…
This is another case designed for the DFRobot Beetle ESP32-C6. It is prepared for 12x12 7.5mm tact switches. If you prefer the button caps to be more protruding or the opposite, you can choose a different size instead of 7.5mm according…
I wasn't very satisfied with the interlocking and easy-remove LiPo model used in my other share; it sometimes lost connection with battery. If you use a different socket approach, you won't have any issues. Still, since there was no point…
MrFox is messing around with DFRobots Maqueen robots a lot. At one point he lost the nosewheel of one of his robots and needed a replacement
This is another case designed for the DFRobot Beetle ESP32-C6. It is prepared for 12x12 7.5mm tact switches. If you prefer the button caps to be more protruding or the opposite, you can choose a different size instead of 7.5mm according…
UPDATE: added the mounting plates This is the Thai Makerspace pipe clamp I referred to: https://www.thingiverse.com/thing:3161549 although I use this one for light jobs like this: 25mm Pipe Clamp This case was specifically designed for…
Technical Description / Technický popis English Version Basic Protective Box for DFRobot Gravity Expansion Board (Raspberry Pi Pico) This is a functional enclosure designed specifically for the DFRobot Gravity Expansion Board for…
This is a simplified 3D model of a DFRobot DC-DC multi-output step-down buck converter. I created/used it as a reference model while designing the enclosure for a volcanic drone payload project. The model is mainly intended for mechanical…
This is a simplified 3D model of a DFRobot Gravity lightning sensor. I created/used it as a reference model while designing the enclosure for a volcanic drone payload project. The model is mainly intended for mechanical fitting, layout…
This is a remix of " WaveShare 7.5" e-Paper case - symmetrical borders " by ASW. Charging can be done via USB port without opening the frame. Additionally, a tilted version is available. Update 2024_10_09: Added the forgotten…
