SEN6x Case mod for DFRobot FireBeetle 2 ESP32-C5
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Air Quality Sensor Case for Sensirion SEN6x Series controlled by a ESP32-C5 FireBeetle 2 devboard from dfrobot
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 9
- Makes
- 0
- Views
- 144
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This is a Mod of Pied Pipers Upstream Model - Thanks!
I've adjusted this to the FireBeetle 2 ESP32-C5 (5 GHz Wifi!), added a wall and a few mounting options.
All Parts (except the Gasket) printed with PETG 0,2 Balanced Profile.
The Gasket (which is optional) used 95A TPU.
Mounting Instructions:
4*M2 (4mm or 6mm) screws for the ESP inside (recommended)
4*M2 (6mm) for the Top Cover (probably optional depending on mounting orientation)
4* 2,5mm screws (i used Spax Wood Screws) for Mounting the whole assembly somewhere
As the screws are directly screwed into the print, it probably won't survive a higher number of screwing cycles.