Huskylens 2 mounting plate for DFRobot Maqueen Lite v5 robot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting plate for mounting a Huskylens 2 AI Camera to a DFRobot Maqueen Lite v5 robot.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 15
- Makes
- 0
- Views
- 136
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
MrFox recently got himself a new toy; A DFRobot Huskylens 2 and wanted to mount it to his faithful old DFRobot Maqueen Lite v5.
It is quite a tight fit between the wheels and the micro:bit slot. Print two plates. Mount the bottom plate with the battery holder on top to the battery holder hex spacers. Feed the battery connector through one of the bigger holes .Attach four hex spacers (30mm or longer) tot the bottom plate and attach the second plate on top. Mount the Huskylens to this plate, connect the I2C cable and you're good to go. Holes fit M3 screws, in a 5x5mm grid.