1 / 6
DFRobot CM4 Router Board Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case designed for the DFRobot router board.
- Rating
- 4 / 5
- Likes
- 1
- Downloads
- 55
- Makes
- 1
- Views
- 275
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
To assemble the case, you will need:
- Four M2.5x10 standoffs
- Four or eight M2.5x6 screws
- (optional) Four 1.6mm spacers between the CM4 and the router board
Print settings:
- Material: PETG
- Layer height: 0.2mm
- Walls loops: 3
- Top/bottom layers: 5
- Infill: 10%
- (optional) Fuzzy skin thickness: 0.1mm