1 / 5
DFRobot Mini Router Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case for the DFRobot router board + Raspberry Pi Compute Module 4 with Waveshare CM4-heatsink
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 152
- Makes
- 3
- Views
- 1,317
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This case fits the following combination of parts:
- Raspberry Pi Compute Module 4 IoT Router Carrier Board Mini (https://www.dfrobot.com/product-2242.html)
- Waveshare 19623 CM4-HEATSINK
- Raspberry Pi Compute Module 4
- Four 15x2.5mm standoffs
There is enough room inside to fit a i2c rtc module.
It is possible to mount an external antenna by drilling the appropriate hole in the lower part and file a small channel to route the cable into the lower section. If there’s interest in it I can make a dedicated stl.