1 / 5
Clamping Desk Drink Holder - Wine, Yeti, Soda, etc
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Desk drink holder for various bottle sizes that tightens using a threaded screw and 10mm hex key
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 112
- Makes
- 1
- Views
- 960
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
Finally a drink holder that will last you for years to come!
- Adjustable between desk thicknesses of ~0.125-1.75 inches (3-45 mm)
- Securely tightens with a printable 10 mm hex key
- Fits small soda cans to full-size wine bottles
- Minimal contact to prevent heat transfer
Prints at 20% infill but I recommend at least 50%, especially if you expect to use wine bottles. Perimeters can be 2 and all other settings normal.
Recommend using manual paint supports for the top overhang on the body - see photo. I removed the interface layer and rotated the bridging infill to 90° so it goes across.
If you encounter any issues, just let me know and I'll get to work! I've tested a few prototypes already so you should be good to go!