Toolbox for Original Prusa Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A modification of my original toolbox that is designed to mount on the Original Prusa Enclosure
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 101
- Makes
- 0
- Views
- 1,000
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This model is a slight modification of my original tool holder, and is designed to fit on the Original Prusa Enclosure. It may be mounted on the top at the front or back section of the left or right side of the enclosure. Mounting hardware depends on the specific locations and is as follows:
Right side towards the rear: Use the rear screw on the enclosure handle, and an M3x8 and M3n nut (both are extras in the Enclosure bag of supplies).
Right side towards the front: Use the screw holding the spool holder, and the front screw holding the handle.
Left side towards the rear: Use the rear screw on the enclosure handle, and an M3x8 and M3n nut (both are extras in the Enclosure bag of supplies).
Left side towards the front: Use the front screw on the enclosure handle, and an M3x8 and M3n nut (both are extras in the Enclosure bag of supplies).
Full list of tools for this holder are included in the original model description.
I've included both the STL and Fusion 360 source files.