Additional Micro scooter handlebar for children
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.32 – €4.06 net (excluding VAT)
For file: Scooter Handlebar-_0.2mm_PLA_MINI_4h17m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.69 excluding VAT (range midpoint).
- Weight reported by the author
- 34 g
- Print time reported by the author
- 4.28 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
An 18cm handlebar for children for a Micro scooter with a screw
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 40
- Makes
- 0
- Views
- 397
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Second handlebar for a Micro scooter for children when they ride with the scooter, for example, on an extra platform. The dimensions have just been designed for a Micro Scooter I'm using (see photo maybe). The handlebar can be attached with a small screw (2x11). I have also uploaded a model without the hole for the screw, if you want to customize that. You must also remember that with the screw the handlebars can not be (fully) retracted. Maybe I can find another solution in a next iteration.
Used print settings: Infill 15%, no supports, layer height: 0.2mm. I used Prusament PLA Galaxy Black - see pictures.
In the gcode files I set a slower first layer printing speed but a thicker first layer for better adhesion.
Please note/Disclaimer: Of course, I do not take any responsibility in terms of safety, because this depends on many factors such as material, correct attachment, etc. Please make yourself sure that the safety for your child is sufficient!