Sovol SV06Plus tool holder V3 UPDATE!!!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sovol SV06/plus tool holder with more tool spots (no supports needed)
- Rating
- 4 / 5
- Likes
- 20
- Downloads
- 267
- Makes
- 3
- Views
- 1,336
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Hi.
This is a remix of the original model. I hope you will like it.
####Changelog####:
- Updated v.2 : different spatula holder (the hotend cleaning tools don't fit!!!!!)
- Updated v.3 : moved and fixed the unclog hotend cleaning tools holder. The nozzle wrench holder is stiffer to prevent braking. (this model has not been tested yet)
- Updated v.3.1 : even larger holes for the hotend cleaning tools. (tested and working)
If you decide to print it, post a make :)
Description:
- added tool spots.
- structural improvements
- no supports
Added tool spots:
- 1x spatula holder 1A
- 1x pliers holder 2A
- 2x hotend cleaning tools 3A
- 2x tweezers holder 4A
Print settings:
Infill: 7-15% Type: gyroid
material: PLA, PET-G
Installation:
take out the top screws on the gantry beam (both sides), take out the blue top z-rod supports, and take off the black gantry beam. Now you can proceed to slide the holder on the aluminum extrusion (mind that the tolerances are very tight and you might need to modify the print if your printer is not well calibrated). Now you can assemble everything back.
Pro tip:
use a lower print speed for the wrench holder & extrusion clamp to ensure a good grip and strength.
Don't slide the holder too much on the extrusion otherwise, it will start to get loose (If it's loose already just put some black electrical tape on the extrusion to fix it.)
----------------------------------------------
Pliers holder author: https://www.printables.com/model/161433-pliers-holder
Happy printing!!!!