1 / 3
Creality Sprite Beacon Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Beacon scanner mount for Creality Sprite Pro.
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 135
- Makes
- 1
- Views
- 1,518
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Beacon scanner mount for Creality Sprite Pro. I currently have the Sprite mounted on my E5+, not sure if it will work on E3P or similar but should be the same. Below is the settings I used, with both PLA and ASA just for reference.
- Nozzle Size: 0.6
- Walls: 2 Top/ Bottom: 2
- Layer Height: 0.3
- Infill: 5%
- Material: PETG at a minimum, recommend ASA or ABS, i originally did PLA, worked for printing other PLA things, barely made it though a PETG print, but your mileage may vary.
- Supports: Yes
- Bed Adhesion: Didn't need it on my E5+, but you may need a brim on a bed singer.