1 / 3
ESP32 DEVKIT V1 36 pins enclosure
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Impossible to find a box to enclose my ESP32 DEVKIT VV1 with 36 pins !! So i decided to model one.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 48
- Makes
- 0
- Views
- 362
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Impossible to find a box to enclose my ESP32 DEVKIT VV1 with 36 pins !! So i decided to model one.
Usefull if you don't have anything connected to the pins.
No special instructions to print this box:
- A cover and the lower part
- Printing with a 0.4 nozzle and layers = 0.20 mm
- no brackets
French version :
Impossible de trouver un boitier pour enfermer mon ESP32 DEVKIT V1 et ses 36 pins !! J'ai donc décidé d'en modéliser un.
Utile uniquement si rien n'est connecté aux pins
Pas d'instructions particulières pour imprimer ce boitier :
- Un couvercle et la partie inférieure
- Impression avec une buse de 0.4 et couches = 0.20 mm
- pas de supports
