1 / 1
Reducer Coupling Excentric Parametric
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D printed parametric reducer coupling, FxF. Used to join two PVC pipes of the different diameter.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 98
- Makes
- 0
- Views
- 511
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
Manufacturing procedure:
- Material: PETG
- 3D Printer: FDM 3D printer, average print time 2 – 10 hours, depending on size
- Slicer settings: 7 perimeters, 0.3mm layer height, print vertically, use brim
- Post processing instructions: Clean the stringing, remove the brim
- Assembly instructions: Do not use PVC glue, use epoxy or cyanoacrylate, use insulation tape to prevent leaking
Parameters for customization:
- Following parameters can be adjusted using Autodesk Fusion 360
- InnerDiameter1 – Enter value of internal diameter of the first side – default 80mm
- InnerDiameter2 – Enter value of internal diameter of the second side – default 100mm
- ConnectorHeight – Height each part where the PVC pipe enters the coupling - default 50mm
- MidPartHeight – Distance of each connector part of the coupling (the part in the middle). - default 40mm