Parametric stackable sorting box system
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stackable sorting box system that you can customise to your needed size in FreeCAD.
- Rating
- 5 / 5
- Likes
- 24
- Downloads
- 120
- Makes
- 0
- Views
- 576
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
A stackable sorting box system, with and without intermediate walls, that you can customize to the size you are looking for in FreeCAD.
Simply change the values in the spreadsheet in FreeCAD and the different versions will update to your specified size.
If you half the length or the width on a second set of boxes, you can stack 2 boxes into one.
Parameters
Use at least 4 times (I would suggest 5x) the nozzle size as wall thickness (e.g.: 1,6 mm for a 0,4 mm nozzle).
The corner radius must be bigger than the wall thickness otherwise FreeCAD will not recalculate the parts correctly.
If you encounter a problem during recalculation, try increasing the radius this solved the issue, the one time I had one, for me.
Print settings
You don't need supports.
Every material should be fine.