JBC ALE 250 solder iron holder (Step Included)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Solder iron holder that fits a 10mm magnetic gauge holder
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 24
- Makes
- 0
- Views
- 419
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I created a soldering iron holder for the JBC ALE 250 soldering gun.
All you need to make it fit is a Gauge holder with a 10mm bar Diameter or you adjust the step model to your own bar.
The model is a tight gripping fit to the handle shape of the soldering iron and has a dowel to locate and hold thee solder iron perfectly, even with light tension it does not move at all.
The screws for fixing and adjusting the solder tube and solder tip are also accessible when mounted. Just go light on the handle clamp tension and you still can use the normal clamp screws to adjust the solder tube on the handle.
The solder feed button on the handle is blocked in this model since i use a foot pedal for my machine. If you still want the solder feed button action on the handle you will need to redesign the model
For assembly you need
3x M4x20 socket head screw
2x M5x30 socket head screw
1x M5x50 socket head screw
To cut the threads you will need
M4 Thread tap
M5 Thread tap
Print with tree supports (same material) at threshold angle 10° and set support to “only critical areas”
Layer height 0.2mm
15% infill
PLA works fine unless you expose the holder to alot of heat or UV
Be careful to not overtighten the 3 clamp screws or the model will split.
A drop of superglue on the 10mm bar will prevent it from rotating and keep everything in position. (With a sharp twist you can undo the glue, no worries)
Hope it helps somebody, feel free to remix or alter the design, but please mention me as the Original creator or in the Remix if you publish it.