Privacy Owl - iMac Edition
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of the owl statue by cushwa.
- Rating
- 5 / 5
- Likes
- 39
- Downloads
- 304
- Makes
- 7
- Views
- 1,631
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
This is a remix of the owl statue by cushwa. All credit goes to him - Just made simple modifications. The statue has an owl standing on a log. I've cut out a section of the log to fit over the top of an iMac displays that it will cover the front-facing camera. When you want to use the camera, just slide it out of the way. There is another model just like this, except it leaves the owl in it's original size (~150mm) which I found to be too large. I started over with a 100mm version.
A Fusion 360 file is included to make it easier to modify.
Print Settings
- Rafts: No
- Supports: No
- Resolution: 0.2mm (Note: I used variable layer heights for the very top of the head to avoid a visible stair-step pattern.)
- Infill: 10%
- Filament: Prusament PLA Galaxy Black
Post-Printing
This is completely optional, but you may choose to add a piece of cellophane tape to the inside of the front face of the log. This is the part that comes into contact with the front of the iMac and actually covers the webcam. This way when you slide the owl out of the way, it will be a little less abrasive.