Olympus TG-6 lens Cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A removable Lens Cap for the Olympus TG-6 camera
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 75
- Makes
- 1
- Views
- 481
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
This is a removable lens cap for the Olympus TG-6 Camera. It is printed to replace the default bezel that you receive with the camera. 2 files need to be printed for the full assembly. The two halves are then connected together using a piece of 1.75mm filament.
The lens cover is designed with a little tab that will lock closed and keep it from falling open.
The cover opens down and to the right so that once the joint becomes a bit more loose it will naturally close if you drop your hand down and go to put the camera in your pocket.
I recommend using supports for printing the base and the cover can be printed on its back with no supports